CAPACITOR AND INDUCTOR BEING SOLDERED ON. SHOWS WIRES ALSO WHICH ARE SOLDERED TO THE CROSSOVER TO CONNECT THE INPUT AND SPEAKERS.
Sunday, November 7, 2010
COMPONENTS SOLDERED ON BOARD
CAPACITOR AND INDUCTOR BEING SOLDERED ON. SHOWS WIRES ALSO WHICH ARE SOLDERED TO THE CROSSOVER TO CONNECT THE INPUT AND SPEAKERS.
BOARDS COMPLETED
CROSSOVERS FINISHED WITH COMPONENTS SOLDERED. SHOWING THE WIRES READY TO BE SOLDERED ON TO THE SPEAKERS AND INPUT. ALSO SHOWING THE SOLDER USED TO SOLDER EACH OF THE WIRE ENDS AND COMPONENTS.
PCB BOARD IN MACHINE
PCB BOARD SET IN MACHINE TO CUT CROSSOVER
THE PCB BOARD IS FASTENED WITH DOUBLE SIDED TAPE SO IT DOES NOT MOVE WHILE BEING CUT.
THE PCB BOARD IS FASTENED WITH DOUBLE SIDED TAPE SO IT DOES NOT MOVE WHILE BEING CUT.
PCB BOARDS DRILLED OUT
USING DRILL PRESS TO DRILL OUT HOLES IN CROSSOVER. SHOWING BEFORE AND AFTER HOLES ARE CUT. PLUS WIRES TO BE SOLDERED ON.
PHOTOS OF PCB BOARDS BEING CUT ON MACHINE
CROSSOVERS BEING CUT OUT IN CAD MACHINE. SHOWING THE CROSSOVER DESIGN BEING CUT 0.2MM INTO THE PCB BOARD.
Thursday, November 4, 2010
Subscribe to:
Posts (Atom)