COMPONENTS SOLDERED ON BOARD

CAPACITOR AND INDUCTOR BEING SOLDERED ON. SHOWS WIRES ALSO WHICH ARE SOLDERED TO THE CROSSOVER TO CONNECT THE INPUT AND SPEAKERS.

BOARDS COMPLETED

CROSSOVERS FINISHED WITH COMPONENTS SOLDERED. SHOWING THE WIRES READY TO BE SOLDERED ON TO THE SPEAKERS AND INPUT. ALSO SHOWING THE SOLDER USED TO SOLDER EACH OF THE WIRE ENDS AND COMPONENTS.

PCB BOARD IN MACHINE

PCB BOARD SET IN MACHINE TO CUT CROSSOVER
THE PCB BOARD IS FASTENED WITH DOUBLE SIDED TAPE SO IT DOES NOT MOVE WHILE BEING CUT.

BOARD HOOKED UP TO TEST RIG

TESTING CROSSOVER WITH TEST RIG

PCB BOARDS DRILLED OUT

USING DRILL PRESS TO DRILL OUT HOLES IN CROSSOVER. SHOWING BEFORE AND AFTER HOLES ARE CUT. PLUS WIRES TO BE SOLDERED ON.

PHOTOS OF PCB BOARDS BEING CUT ON MACHINE

CROSSOVERS BEING CUT OUT IN CAD MACHINE. SHOWING THE CROSSOVER DESIGN BEING CUT 0.2MM INTO THE PCB BOARD.

Z AXIS SET

AXIS ALIGNED SO WILL CUT CROSSOVER CORRECTLY

CAD MACHINE SET UP

SETTING UP THE CAD MACHINE THROUGH THE PROGRAM 2D DESIGN

CIRCUIT FREEHAND TRACED

A TRACING OF THE CROSSOVER TO BE CUT OUT ON THE CAD MACHINE

CIRCUIT DIAGRAMS

SIMPLE CIRCUIT DIAGRAM CONVERTED SO TO SHOW COMPONENTS AND ALSO FOR THE CUT OUT ONTO PCB BOARD